加工定制:是 品牌:阿法拉伐 型号:M30
用途:食品 类型:冷却与换热 制冷量:1000-5000KW
控温范围:0-180 流量压力:10000 风量(m3/h):10000
全进口阿法拉伐M30换热器
Applications
General heating and cooling duties.
Standard design
The plate heat exchanger consists of a pack of corrugated
movable pressure plate and compressed by tightening bolts.
The plates are fitted with a gasket, which seals the interplate
channel and directs the fluids into alternate channels. The
number of plates is determined by the flow rate, physical
properties of the fluids, pressure drop and temperature
program. The plate corrugations promote fluid turbulence
and support the plates against differential pressure.
The plate and the pressure plate are suspended from an
upper carrying bar and located by a lower guiding bar, both
of which are fixed to a support column.
Connections are located in the frame plate or, if either or both
fluids make more than a single pass within the unit, in the
frame and pressure plates.
Plates
Stainless steel Alloy 304, Stainless steel Alloy 316,
Stainless steel Alloy C276 or Titanium
Gaskets
Nitrile or EPDM
Connections
FM PED Size 300/350 mm DIN PN10
FM ASME Size 12”/14” ANSI 100
FG PED Size 300/350 mm DIN PN16
FG ASME Size 12”/14” ANSI 150
FD PED Size 300/350 mm DIN PN25
FD ASME Size 12”/14” ANSI 300
TECHNICAL DATA
Mechanical design pressure (g) / temperature
FM PED 1.0 MPa / 190 °C
FM ASME 100 psig / 320 °F
FG PED 1.6 MPa / 180 °C
FG ASME 150 psig / 320 °F
FD PED 2.5 MPa / 190 °C
FD ASME 300 psig / 320 °F
Maximum heat transfer surface
1400 m2 (14,980 sq. ft)
Measurements (mm)
Type H* W h
M30-FM 2882 1150 470
M30-FG 2882 1170 470
M30-FD 2920 1190 506
? Physical properties of liquids in question (if not water)
? Desired working pressure
? Maximum permitted pressure drop
? Available steam pressure