供应阿法拉伐M3板片及密封垫

手机

查看

最后更新时间：2017-03-07

人气值 364

品牌：

售后服务：由上海开量能源科技从上海闵行区发货，并提供售后服务

加工定制：是传热方式：间壁式换热器品牌：阿法拉伐
类型：板式换热器流道截面积：0.001 用途：换热
重量(kg)：600kg
供应阿法拉伐M3板片及密封垫

Standard design
The plate heat exchanger consists of a pack of corrugated
metal plates with portholes for the passage of the two fluids
between which heat transfer will take place.
The plate pack is assembled between a fix frame plate and
a movable pressure plate and compressed by tightening bolts.
The plates are fitted with a gasket which seals the interplate
channel and directs the fluids into alternate channels. The
number of plates is determined by the flow rate, physical
properties of the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and
support the plates against differential pressure.
The plate and the pressure plate are suspended from an
upper carrying bar and located by a lower guiding bar, both
of which are fixed to a support column.
Connections are located in the frame plate or, if either or both
fluids make more than a single pass within the unit, in the
frame and pressure plates.
STANDARD MATERIALS
Frame plate
Mild steel, Epoxy painted
Nozzles
Carbon steel
Pipe: Alloy 316, Titanium
Plates
Stainless steel: AISI 316 or Titanium
Gaskets
M3 Nitrile, EPDM, HeatSealF?
M3X Nitrile, EPDM, Viton?
M3D Nitrile, EPDM
TECHNICAL DATA
Pressure vessel codes, PED, ASME, pvcALS?
Mechanical design pressure (g) / temperature
FG PED, pvcALS? 1.6 MPa / 180°C
FG ASME 150 psig / 350°F
CONNECTIONS
FG PED Size 1?" Pipe, thread ISO-R 1?"
FG pvcALS? Size 1?" Pipe, thread ISO-R1?"
FG pvcALS? Size 1?" Internal thread ISO-G 1?",
carbon steel
FG ASME Size 1?" Pipe, thread NPT 1?"
Maximum heat transfer surface
3.9 m2 (40 sq. ft)
Dimensions
Measurements mm (inch)
The number of bolts may vary depending on pressure rating.
Flow principle of an M3-X
plate heat exchanger
Flow principle of an M3
plate heat exchanger
Particulars required for quotation
? Flow rates or heat load
? Temperature program
? Physical properties of liquids in question (if not water)
? Desired working pressure
? Maximum permitted pressure
上海开量能源科技有限公司位于中国上海市古北路1881号，上海开量能源科技有限公司是一家阀门、传感器、催化剂、换热器、工程配套、超滤膜等产品的经销批发的私营股份有限公司。上海开量能源科技有限公司经营的阀门、传感器、催化剂、换热器、工程配套、超滤膜畅销消费者市场。上海开量能源科技有限公司的产品在消费者当中享有较高的地位，公司与多家零售商和代理商建立了长期稳定的合作关系。上海开量能源科技有限公司经销的阀门、传感器、催化剂、换热器、工程配套、超滤膜品种齐全、价格合理。上海开量能源科技有限公司实力雄厚，重信用、守合同、保证产品质量，以多品种经营特色和薄利多销的原则，赢得了广大客户的信任。