供应阿法拉伐M15换热器

加工定制：是 品牌：阿法拉伐 型号：M15
用途：食品 类型：冷却与换热 制冷量：1000-5000KW
控温范围：0-180 流量压力：10000 风量(m3/h)：10000
供应阿法拉伐M15换热器


Standard design
The plate heat exchanger consists of a pack of corrugated
metal plates with portholes for the passage of the two fluids
between which heat transfer will take place.
The plate pack is assembled between a fix frame plate and
a movable pressure plate and compressed by tightening bolts.
The plates are fitted with a gasket which seals the interplate
channel and directs the fluids into alternate channels. The
number of plates is determined by the flow rate, physical
properties of the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and
support the plates against differential pressure.
The plate and the pressure plate are suspended from an
upper carrying bar and located by a lower guiding bar, both
of which are fixed to a support column.
Connections are located in the frame plate or, if either or both
fluids make more than a single pass within the unit, in the
frame and pressure plates.
STANDARD MATERIALS
Frame plate
Mild steel, Epoxy painted
Nozzles
Carbon steel
Metal lined: Stainless steel, Titanium
Rubber lined: Nitrile, EPDM
Plates
Stainless steel: Alloy 304, Alloy 316
Titanium
Alloy C-276
Alloy 254 SMO
Gaskets ( Clip-on/tape-on, glued)
M15B Nitrile, EPDM, HNBR, EPDMF,
Viton?G, AL-EPDM
M15M Nitrile EPDM, HNBR, EPDMF,
Viton?G, AL-EPDM
M15E Nitrile
M15BD Nitrile, EPDM, VitonRG, HNBR
TECHNICAL DATA
Pressure vessel codes, PED, ASME, pvcALS?
Mechanical design pressure (g) / temperature
FL pvcALS? 0.6 MPa / 130°C
FM PED, pvcALS? 1.0 MPa / 180°C
FG PED, pvcALS? 1.6 MPa / 180°C
FG ASME 150 psig / 356°F
FD PED, pvcALS? 3.0 MPa / 180°C
FD ASME 300 psig / 356°F
CONNECTIONS
FL pvcALS? Size 150 mm DIN/GB/GOST PN10,
ASME CI. 150, JIS 10K
FM PED Size 150 mm DIN 2501 PN16,
ASME CI. 150
FM pvcALS? Size 150 mm DIN/GB/GOST PN10,
ASME CI. 150, JIS 10K
FG PED Size 150 mm DIN 2501 PN16,
ASME CI. 150
FG pvcALS? Size 150 mm DIN/GB/GOST PN16,
ASME CI. 150, JIS 16K
FG ASME Size 6" ASME CI. 150
FD PED Size 150 mm DIN 2501 PN25,
ASME CI. 300
FD ASME Size 6" ASME CI. 300
Dimensions
Measurements mm (inch)
Type H W h
M15-FL 1815 (71 ?") 610 (24") 275 (10 ?")
M15-FM max. 1941 (76 ?") 610 (24") 275 (10 ?")
M15-FG max. 1941 (76 ?") 650 (25 ?") 275 (10 ?")
M15-FD max. 2036 (80") 650 (25 ?") 370 (14 ?")
Maximum heat transfer surface
390 m? (4200 sq. ft)
Particulars required for quotation
? Flow rates or heat load
? Temperature program
? Physical properties of liquids in question (if not water)
? Desired working pressure
? Maximum permitted pressure drop
? Available steam pressure
The number of tightening bolts may vary depending on pressure rating.